unset key protection enable
set clock dst-off
set clock ntp
set clock timezone 8
set clock dst recurring start-weekday 2 0 3 02:00 end-weekday 1 0 11 02:00
set vrouter trust-vr sharable
set vrouter “untrust-vr”
exit
set vrouter “trust-vr”
unset auto-route-export
exit
set service “OPENVPN” protocol udp src-port 0-65535 dst-port 1194-1194
set service “HTTP2” protocol tcp src-port 0-65535 dst-port 8080-8080
set alg appleichat enable
unset alg appleichat re-assembly enable
set alg sctp enable
set auth-server “Local” id 0
set auth-server “Local” server-name “Local”
set auth default auth server “Local”
set auth radius accounting port 1646
set admin name “netscreen”
set admin password “nOUoImr0FJQCcDTNysHDssAtkpJPon”
set admin http redirect
set admin auth web timeout 10
set admin auth server “Local”
set admin format dos
set zone “Trust” vrouter “trust-vr”
set zone “Untrust” vrouter “trust-vr”
set zone “DMZ” vrouter “trust-vr”
set zone “VLAN” vrouter “trust-vr”
set zone “Untrust-Tun” vrouter “trust-vr”
set zone “Trust” tcp-rst
set zone “Untrust” block
unset zone “Untrust” tcp-rst
set zone “MGT” block
unset zone “V1-Trust” tcp-rst
unset zone “V1-Untrust” tcp-rst
set zone “DMZ” tcp-rst
unset zone “V1-DMZ” tcp-rst
unset zone “VLAN” tcp-rst
set zone “Untrust” screen tear-drop
set zone “Untrust” screen syn-flood
set zone “Untrust” screen ping-death
set zone “Untrust” screen ip-filter-src
set zone “Untrust” screen land
set zone “V1-Untrust” screen tear-drop
set zone “V1-Untrust” screen syn-flood
set zone “V1-Untrust” screen ping-death
set zone “V1-Untrust” screen ip-filter-src
set zone “V1-Untrust” screen land
set interface “ethernet0/0” zone “Trust”
set interface “ethernet0/1” zone “Trust”
set interface “ethernet0/2” zone “Untrust”
set interface “ethernet0/3” zone “Untrust”
set interface “ethernet0/7” zone “Trust”
set interface ethernet0/0 ip 192.168.21.1/24
set interface ethernet0/0 nat
unset interface vlan1 ip
set interface ethernet0/1 ip 192.168.11.1/24
set interface ethernet0/1 nat
set interface ethernet0/2 ip 113.106.92.174/27
set interface ethernet0/2 route
set interface ethernet0/3 ip 106.3.224.174/27
set interface ethernet0/3 route
set interface ethernet0/7 ip 172.16.0.1/24
set interface ethernet0/7 nat
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface ethernet0/0 ip manageable
set interface ethernet0/1 ip manageable
set interface ethernet0/2 ip manageable
set interface ethernet0/3 ip manageable
set interface ethernet0/7 ip manageable
unset interface ethernet0/0 manage ssh
unset interface ethernet0/0 manage telnet
unset interface ethernet0/0 manage snmp
unset interface ethernet0/1 manage ssh
unset interface ethernet0/1 manage telnet
set interface ethernet0/2 manage ping
set interface ethernet0/2 manage ssh
set interface ethernet0/3 manage ping
set interface ethernet0/3 manage ssh
unset interface ethernet0/7 manage telnet
unset interface ethernet0/7 manage snmp
set interface vlan1 manage mtrace
set interface ethernet0/2 vip interface-ip 1194 “OPENVPN” 192.168.11.70 manual
set interface ethernet0/2 vip 113.106.92.180 8080 “HTTP2” 192.168.11.100 manual
set interface ethernet0/3 vip 106.3.224.180 8080 “HTTP2” 192.168.11.100 manual
unset flow no-tcp-seq-check
set flow tcp-syn-check
unset flow tcp-syn-bit-check
set flow reverse-route clear-text prefer
set flow reverse-route tunnel always
set pki authority default scep mode “auto”
set pki x509 default cert-path partial
set dns host dns1 202.96.134.33
set dns host dns2 202.96.128.86
set dns host dns3 0.0.0.0
set address “Trust” “10.8.0.0/24” 10.8.0.0 255.255.255.0
set address “Trust” “192.168.1.0/24” 192.168.1.0 255.255.255.0
set address “Trust” “192.168.1.1/24” 192.168.1.1 255.255.255.0
set address “Trust” “192.168.100.0/24” 192.168.100.0 255.255.255.0
set address “Trust” “192.168.11.0/24” 192.168.11.0 255.255.255.0
set address “Trust” “192.168.21.0/21” 192.168.21.0 255.255.248.0
set address “Untrust” “192.168.1.1/24” 192.168.1.1 255.255.255.0
set address “Untrust” “192.168.11.1/24” 192.168.11.1 255.255.255.0
set address “Untrust” “220.243.139.229/27” 220.243.139.229 255.255.255.224
set crypto-policy
exit
set ike respond-bad-spi 1
set ike ikev2 ike-sa-soft-lifetime 60
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set vrouter “untrust-vr”
exit
set vrouter “trust-vr”
exit
set l2tp default dns1 202.96.128.86
set l2tp default dns2 202.96.134.33
set l2tp default ppp-auth chap
set url protocol websense
exit
set policy id 1 from “Trust” to “Untrust” “192.168.21.0/21” “Any” “ANY” permit log
set policy id 1
exit
set policy id 2 from “Trust” to “Untrust” “192.168.11.0/24” “Any” “ANY” permit log
set policy id 2
exit
set policy id 6 from “Untrust” to “Trust” “Any” “VIP(ethernet0/2)” “OPENVPN” permit log
set policy id 6
exit
set policy id 7 from “Untrust” to “Trust” “Any” “VIP(113.106.92.180)” “HTTP2” permit log
set policy id 7 disable
set policy id 7
exit
set policy id 8 from “Untrust” to “Trust” “Any” “VIP(106.3.224.180)” “HTTP2” permit log
set policy id 8 disable
set policy id 8
exit
set nsmgmt bulkcli reboot-timeout 60
set ssh version v2
set ssh enable
set config lock timeout 5
unset license-key auto-update
set telnet client enable
set ntp server “time.nist.gov”
set ntp server src-interface “ethernet0/2”
set snmp community “public” Read-Write Trap-on traffic version any
set snmp host “public” 192.168.11.70 255.255.255.255 trap v2
set snmp contact “GDC A12 RACK”
set snmp name “SSG140”
set snmp port listen 161
set snmp port trap 162
set vrouter “untrust-vr”
exit
set vrouter “trust-vr”
set source-routing enable
unset add-default-route
set route 0.0.0.0/0 interface ethernet0/2 gateway 113.106.92.161
set route 10.8.0.0/24 interface ethernet0/1 gateway 192.168.11.70
set route 0.0.0.0/0 interface ethernet0/3 gateway 106.3.224.161
exit
set vrouter “untrust-vr”
exit
set vrouter “trust-vr”
exit
6 月 202014