11月 072014
 

Summary:

This article provides Point-to-Point over Ethernet (PPPoE) configuration examples.

For other topics, go to the SRX Getting Started main page.

Problem or Goal:

Configure PPPoE.

Cause:

Solution:

This section contains the following:

Basic PPPoE Configuration Example

The following example illustrates a basic PPPoE configuration.

interfaces {
    fe-0/0/5 {
        unit 0 {
            encapsulation ppp-over-ether;
        }
    }
    pp0 {
        unit 0 {
            ppp-options {
                pap {
                    access-profile ppp-profile;
                    local-password "dkwoxslxqpz";##SECRET-DATA
                    local-name "username";
                    passive;
                }
            }
            pppoe-options {
                underlying-interface fe-0/0/5.0;
                auto-reconnect 10;
                client;
                idle-timeout 0;
            }
            family inet {
                negotiate-address;
                mtu 1492;
            }
        }
    }
}

Complete PPPoE and ADSL Configuration Example

The following example is a complete working configuration example using the following settings:

  • ADSL is the primary WAN interface in the untrust zone.
  • A 3G is the backup interface, monitoring the primary ADSL (at) interface.
  • A dialup interface (external modem) is used as a failover.
  • The at-1/0/0 and pp0.0 interfaces are in the untrust zone.
  • For pp0.0, point-to-point is configured.
  • PAP is configured using the passive option.
  • The PPPoE underlying-interface and client options are configured.
  • All Ethernet ports are in a single VLAN group with a DHCP server providing service.
  • A default route to the DSL interface is configured.
  • Source NAT is enabled.
system {
    host-name SRX210;
    name-server {
        208.67.222.222;
        208.67.220.220;
    }
    services {
        ssh;
	telnet;
        web-management {
            http {
                interface vlan.0;
            }
            https {
                system-generated-certificate;
                interface vlan.0;
            }
        }
        dhcp {
	    domain-name jnpr.net;
            router {
                192.168.0.1;
            }
            pool 192.168.0.0/24 {
                address-range low 192.168.0.100 high 192.168.0.199;

            }
        }
    }
    syslog {
        archive size 100k files 3;
        user * {
            any emergency;
        }
        file messages {
            any critical;
            authorization info;
        }
        file interactive-commands {
            interactive-commands error;
        }
    }
    max-configurations-on-flash 5;
    max-configuration-rollbacks 5;
    license {
        autoupdate {
            url https://ae1.juniper.net/junos/key_retrieval;
        }
    }
}
interfaces {
    interface-range interfaces-trust {
	member ge-0/0/0;
        member ge-0/0/1;
        member fe-0/0/2;
        member fe-0/0/3;
        member fe-0/0/4;
        member fe-0/0/5;
        member fe-0/0/6;
        member fe-0/0/7;
        unit 0 {
            family ethernet-switching {
                vlan {
                    members vlan-trust;
                }
            }
        }
    }
    cl-0/0/8 {
        traceoptions {
            flag all;
        }
        modem-options {
            init-command-string "AT&C1";
        }
        dialer-options {
            pool 1 priority 23;
        }
    }
    dl0 {
        unit 0 {
            family inet {
                negotiate-address;
            }
            dialer-options {
                pool 1;
                dial-string 1234;
            }
        }
    }
    at-1/0/0 {
        encapsulation ethernet-over-atm;
        atm-options {
            vpi 0;
        }
        dsl-options {
            operating-mode auto;
        }
        unit 0 {
            encapsulation ppp-over-ether-over-atm-llc;
            vci 0.35;
            backup-options {
                interface dl0.0;
            }
        }
    }
    pp0 {
        traceoptions {
            flag all;
        }
        unit 0 {
            point-to-point;
            ppp-options {
                pap {
                    default-password "$9$/Gav9u1RhrK871RNds2UDCtu1hr"; ## SECRET-DATA
                    local-name "phadu@sbcglobal.net";
                    local-password "$9$hWLceWLxdwgJWLZUHqzFSreWxd"; ## SECRET-DATA
                    passive;
                }
            }
            pppoe-options {
                underlying-interface at-1/0/0.0;
                client;
            }
            no-keepalives;
            family inet {
                negotiate-address;
            }
        }
    }
    vlan {
        unit 0 {
            family inet {
                address 192.168.0.1/24;
            }
        }
    }
}
routing-options {
    static {
	route 0.0.0.0/0 next-hop pp0.0 metric 0;
        route 0.0.0.0/0 next-hop dl0.0;
    }
}
security {
    nat {
        source {
            rule-set trust-to-untrust {
                from zone trust;
                to zone untrust;
                rule source-nat-rule {
                    match {
                        source-address 0.0.0.0/0;
                    }
                    then {
                        source-nat {
                            interface;
                        }
                    }
                }
            }
        }
    }
    screen {
        ids-option untrust-screen {
            icmp {
                ping-death;
            }
            ip {
                source-route-option;
                tear-drop;
            }
            tcp {
                syn-flood {
                    alarm-threshold 1024;
                    attack-threshold 200;
                    source-threshold 1024;
                    destination-threshold 2048;
                    timeout 20;
                }
                land;
            }
        }
    }
    zones {
        security-zone trust {
            host-inbound-traffic {
                system-services {
                    all;
                }
                protocols {
                    all;
                }
            }
            interfaces {
                vlan.0;
            }
        }
        security-zone untrust {
            screen untrust-screen;
            host-inbound-traffic {
                system-services {
                    all;
                }
            }
            interfaces {
		at-1/0/0.0;
                pp0.0;
		dl0.0;
            }
        }
    }
    policies {
        from-zone trust to-zone untrust {
            policy default-permit {
                match {
                    source-address any;
                    destination-address any;
                    application any;
                }
                then {
                    permit;
                }
            }
        }
    }
}
poe {
    interface all;
}
vlans {
    vlan-trust {
        vlan-id 3;
        l3-interface vlan.0;
    }
}

Another configuration example is KB15347 – What will be the configuration for PPPoE over ATM on an ADSL interface?.

Technical Documentation

Interface Encapsulation Feature Guide for Security Devices

Troubleshooting

Use the show interfaces interface_name extensive command to review state and history information for the at and pp interfaces. For example:
user@host> show interfaces at-1/0/0 extensive
user@host>
show interfaces pp0 extensive

ADSL interface modules have LEDs that show sync and traffic status. For more information, see http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/specifications/mini-pim-adsl2-srx-series-leds.html.

Purpose:

Implementation

Related Links:

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

(required)

(required)

此站点使用Akismet来减少垃圾评论。了解我们如何处理您的评论数据